Memory Diagnostic 6.1.7600.16385 (win7_rtm.090713-1255) Message Table

1 MESSAGETABLE
{
31000,  	"MT_MSG_FIRST"
31001,  	"Internal error: the checkerboard dimension is too large."
31002,  	"Internal error: bad parameters to DeviceGetOverlapSubranges."
31003,  	"Intel PIIX4"
31004,  	"Intel 82801AA ICH"
31005,  	"Intel 82801AB ICH0"
31006,  	"Intel 82801BA ICH2"
31007,  	"Intel 82801E C-ICH"
31008,  	"Intel 82801CA ICH3"
31009,  	"Intel 82801DB ICH4"
31010,  	"Intel 82443BX with AGP"
31011,  	"Intel 82443BX without AGP"
31012,  	"Intel 82443GX with AGP"
31013,  	"Intel 82443GX without AGP"
31014,  	"Intel 82845"
31015,  	"Internal error: malformed SPD hierarchy."
31016,  	"Internal error: malformed memory controller hierarchy."
31017,  	"Internal error: BufferPos called on a NULL buffer."
31018,  	"Internal error: overflow in MtScreenFlipAttribute."
31019,  	"Internal error: bad parameters to MtScreenFlipAttribute."
31020,  	"Internal error: MtScreenBufferPrintRegion called on a scrollable screen."
31021,  	"Internal error: MtScreenBufferPrintEx called on a non-scrollable screen."
31022,  	"Internal error: strchr returned a meaningless value."
31023,  	"Internal error: MtScreenBufferPrintAt called on a scrollable screen."
31024,  	"Internal error: meaningless stride value %d."
31027,  	"Internal error: GDT and IDT are not contiguous."
31028,  	"Internal error: GDT and LDT are too large for local storage."
31029,  	"Internal error: invalid SU relocation."
31030,  	"Internal error: can't locate %lx in DeregisterFixup."
31031,  	"Internal error: out of memory."
31032,  	"Internal error: appended buffers are too large."
31033,  	"Internal error: image relocation failed: %s."
31034,  	"Conflict"
31035,  	"Invalid"
31036,  	"Unknown"
31037,  	"There is no room in memory for this copy of the memory diagnostic. This\nindicates that the system doesn't have enough memory to run this program."
31038,  	"E820 (1)"
31039,  	"E820 (2)"
31040,  	"E820 (3)"
31041,  	"Internal error: unrecognized memory map."
31042,  	"Internal error: bad parameters to PCIConfig."
31043,  	"Internal error: unknown PCI access type."
31044,  	"MATS+ (cache enabled)"
31045,  	"INVC"
31046,  	"Stride6 (cache enabled)"
31047,  	"Stride38"
31048,  	"SCHCKR (cache enabled)"
31049,  	"CHCKR2"
31050,  	"CHCKR3"
31051,  	"CHCKR4"
31052,  	"CHCKR8"
31053,  	"MATS+ (cache disabled)"
31054,  	"Stride6 (cache disabled)"
31055,  	"SCHCKR (cache disabled)"
31056,  	"Identifies most basic faults using walking ones\nand zeroes."
31057,  	"Performs one and zero fills in order to locate\ninverse coupling faults."
31058,  	"Uses a stride-6 pattern to simulate a checkerboard\nof ones and zeroes."
31059,  	"Uses a stride-38 pattern to simulate a checkerboard\nof ones and zeroes."
31060,  	"Applies a simple checkerboard pattern."
31061,  	"Applies a 2x2 extended checkerboard pattern."
31062,  	"Applies a 3x3 extended checkerboard pattern."
31063,  	"Applies a 4x4 extended checkerboard pattern."
31064,  	"Applies a 8x8 extended checkerboard pattern."
31065,  	"Internal error: tried to switch to a zero length test list."
31066,  	"Internal error: test list is empty."
31067,  	"Turn on caching for all tests"
31068,  	"Turn off caching for all tests"
31069,  	"Use the default cache settings"
31070,  	"Restore the default memory map."
31071,  	"E820 (2). This is the standard E820-based memory map."
31072,  	"E820 (3). This is an extended E820-based map. This map more fully tests\n    the memory used by the test program. However, each test will take\n    about twice as long to run."
31073,  	"Run the basic test suite"
31074,  	"Run the standard test suite"
31075,  	"Run the extended test suite"
31076,  	"Build a custom test suite"
31077,  	"View the active test suite"
31078,  	"Change cache settings"
31079,  	"Change the memory map"
31080,  	"Change the test suite"
31081,  	"View errors by memory module"
31082,  	"View errors by test"
31083,  	"View system information"
31084,  	"Advanced options"
31085,  	"Enter selection"
31086,  	"Return to the previous menu"
31087,  	"`%s' is not a recognized option. Press any key to continue."
31094,  	"Press any key to continue"
31095,  	"cache"
31096,  	"Windows Memory Diagnostic is currently using the %s memory map."
31097,  	"Windows Memory Diagnostic will now use the %s memory map. The new map\nwill not be created until testing resumes."
31098,  	"The test suite has been updated."
31099,  	"basic"
31100,  	"standard"
31101,  	"extended"
31102,  	"(S) Saves the current test suite and exits.\n(X) Exits without saving any changes.\n\nThe TAB key toggles between the windows. Use the UP and DOWN arrows to select\ntests. Use the LEFT and RIGHT arrows to move a test to the opposite window.\nUse (U) and (D) to move tests up and down within a window. The colors\nidentify"
31103,  	"Available Tests"
31104,  	"Selected Tests"
31105,  	"The colors identify"
31106,  	"(PGUP/PGDN) Scroll (X) Exit"
31107,  	"Windows Memory Diagnostic found %d errors. The error distribution\nby test is:"
31108,  	"Windows Memory Diagnostic found 1 error. The error distribution\nby test is:"
31110,  	"(C) Resume (M) Menu (TAB/ARROW) Navigate"
31111,  	"(P) Pause (X) Exit (T) Run extended tests"
31112,  	"(P) Pause (X) Exit (T) Run standard tests"
31113,  	"Reboot failed."
31114,  	"Pass"
31115,  	"Test"
31116,  	"Cache"
31117,  	"Results"
31118,  	"Address"
31119,  	"Expected"
31120,  	"Actual"
31121,  	"Off"
31122,  	"    The memory map contained ranges that extended above four gigabytes."
31123,  	"    The memory map contained memory ranges too near the four-gigabyte\n    boundary to be processed."
31124,  	"    One or more memory map entries were aligned in a way that could not\n    be processed."
31126,  	"Internal error: invalid truncation cause code."
31127,  	"Windows Memory Diagnostic (WMD) could not process the system memory map. This\noccurred because of deficiencies within WMD, not the computer. As a result,\nnot all of the computer memory will be tested.  The specific problem was:"
31128,  	"Press (C) to continue. Press any other key to exit WMD."
31129,  	"Active"
31130,  	"Succeeded"
31131,  	"Failed"
31132,  	"Pass: %d Test: %d of %d"
31133,  	"Internal error: the test number subscreen is too wide."
31134,  	"Windows Memory Diagnostic"
31135,  	"Pass progress"
31136,  	"Test progress"
31137,  	"Range progress"
31138,  	"Test name"
31139,  	"Test description"
31140,  	"On"
31141,  	"and"
31142,  	"tests"
31143,  	"unknown"
31144,  	" System memory map"
31145,  	"No errors have been found. The memory diagnostic will continue running\nuntil the (X) key is pressed or the machine is powered off."
31146,  	"Windows Memory Diagnostic is currently using default cache settings."
31147,  	"Windows Memory Diagnostic is currently forcing cache on for all tests."
31148,  	"Windows Memory Diagnostic is currently forcing cache off for all tests."
31149,  	"Windows Memory Diagnostic will use default cache settings."
31150,  	"Windows Memory Diagnostic will turn on the cache for all tests."
31151,  	"Windows Memory Diagnostic will turn off the cache for all tests."
31152,  	"Memory controller: %s"
31153,  	"Bank `%s':"
31154,  	"Not populated"
31155,  	"The contents of this slot are unknown"
31156,  	"  Manufacturer: %s"
31157,  	"Part number:"
31158,  	"  Production date: Week %x, %s%02x"
31159,  	"Serial number:"
31160,  	"Fast Page DRAM"
31161,  	"Slot `%s':"
31162,  	"Type:"
31163,  	"Windows Memory Diagnostic found %d errors. The error distribution\nby memory module is:"
31164,  	"Windows Memory Diagnostic found 1 error. The error distribution\nby memory module is:"
31165,  	"Windows Memory Diagnostic (WMD) detected an error. However, WMD could not\ndetermine in which memory module this error occurred."
31166,  	"Windows Memory Diagnostic (WMD) detected %d errors. WMD could not determine\nwhich memory module was associated with these errors. However, all detected\nerrors occurred within the same module."
31167,  	"Windows Memory Diagnostic (WMD) detected %d errors. WMD could not determine\nwhich memory modules were associated with these errors."
31168,  	"LRAND"
31169,  	"Applies random data to all of memory."
31170,  	"WMATS+"
31171,  	"Runs a normal MATS+ test using data patterns\ntailored for the memory in this system."
31172,  	"WINVC"
31173,  	"Runs an inverse coupling test using data\npatterns tailored for the memory in this system."
31174,  	"WSCHCKR"
31175,  	"Runs an simple checkerboard test using data\npatterns tailored for the memory in this system."
31176,  	"WStride-6"
31177,  	"Applies a stride-6 pattern using data patterns\ntailored for the memory in this system."
31178,  	"WCHCKR3"
31179,  	"Applies a 3x3 checkerboard using data patterns\ntailored for the memory in this system."
31180,  	"ERAND"
31181,  	"Makes several passes through memory applying\nrandom data patterns."
31182,  	"About Windows Memory Diagnostic"
31183,  	"Windows Memory Diagnostic v0.4\n\nCopyright (c) Microsoft Corporation 2003. All rights reserved."
31184,  	"Windows Memory Diagnostic v0.5."
31185,  	"Press any key to exit."
31186,  	"Boot Library Free"
31187,  	"Pass: %d of %d Test: %d of %d"
31188,  	"MT_MSG_LAST"
}